S82.10-4517-07
Shown on model 639.7 with code W50 (Rear-end door, two wing, 180 degrees without window) |
1 | Bolts | E21/1 | Hinged rear door 3rd brake lamp | |
2 | Bracket | X20/11 | 3rd brake lamp connector, rear-end door |
S82.10-4518-07
Shown on model 639.7 with code W65 (Liftgate) |
1 | Bolts | E21/2 | Tailgate 3rd brake lamp | X20/1 | 3rd brake lamp connector, tailgate |
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Remove bolt (1) | ||
2 | Disconnect rear-end door 3rd brake lamp connector (X20/11) or liftgate 3rd brake lamp connector (X20/1) | On vehicles with code W50 (Two-wing rear-end door, 180 degrees without window), tie wiring harness together to aid installation. | |
3 | Remove rear-end door brake lamp 3 (E21/1) or liftgate 3rd brake lamp (E21/2) | ||
4 | Install in the reverse order | ||
| Check | ||
5 | Perform function test of rear-end door 3rd brake lamp (E21/1) or liftgate 3rd brake lamp (E21/2) |
Viitatut asiakirjat
- ah0000z030001a Yleisiä ohjeita liittyen autoihin, joissa on kj.-sähköjärjestelmä ja/tai litiumioniakku ja/tai kaasuvoimansiirtojärjestelmä sekä henkilökohtaisiin suojavarusteisiin
- as0000z003501a Hengenvaara suoritettaessa töitä rakenneosille ja järjestelmille, joissa on U >= 30 V vaihtojännite (AC) tai U >= 60 V tasajännite (DC)