AR82.10-D-1202B | Remove/install headlamp unit bulbs | 13.10.98 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODEL 690.6
D82.10-0001-05
1, 3 Locking arm
2, 4, 10 Tensioning clamp
5 Fog lamp bulb
6 Housing cover
7 Low beam bulb
8 Side light bulb
9 Main beam bulb
11 Turn signal bulb with holder
| Remove/install | ||
1 | Open engine hood | ||
2 | Open locking arm (1, 3) at rear of headlamp unit and take off housing cover (6) | Do not touch the glass of the bulbs, instead use a soft cloth that is free of grease. | |
3.1 | Open retaining clip (2), take out bulb (7) and unplug electrical connection | Low beam bulb. | |
3.2 | Pull out holder, pull bulb (8) out of seat | Standing lamp bulb. | |
3.3 | Open tensioning clamp (4), take out bulb (5) and unplug electrical connection | Fog lamp bulb. | |
3.4 | Open tensioning clamp (10), take out bulb (9) and unplug electrical connection. | High beam bulb. | |
4 | Install in reverse sequence. | Installation: Insert bulbs into the guide slots provided. |