ar8050s9840s

Removing and installing ATA alarm signal siren

Tyyppi ar · aihe 80.50 · versio 0104 · 2013-06-13

Koskee: MODEL 636, 639 with CODE FZ5 (Anti-theft alarm system) MODEL 639 with CODE FY1 (ATA 2 with interior protection, towing sensor and battery-operated horn)

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 80 Keskuslukitus, mukavuustoiminnot, ajonesto › 80.50 Varashälytin (EDW), sisätilavalvonta, poishinaussuoja — Mallisarja 636 · Mallisarja 639

EinPAS 29 Ajolupa-/lukitussuojajärjestelmä › 29.20 Murto-/varashälytin › 29.20.20 Äänitorvi — Mallisarja 636 · Mallisarja 639

AR80.50-S-9840S

Removing and installing ATA alarm signal siren

06.06.2013

MODEL

636, 639

with CODE FZ5 (Anti-theft alarm system)

MODEL

639

with CODE FY1 (ATA 2 with interior protection, towing sensor and battery-operated horn)

Removing and installing ATA alarm signal siren

1

Wheel well lining

2

Expansion clip

3

Screw

H3

Alarm signal horn

S80.50-4503-06

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Remove/install

1

Remove wheel well liner (1)

For this purpose remove expansion clips (2), fold wheel well liner (1) to side.

2

Disconnect electrical connector from alarm signal horn (H3)

3

Remove alarm signal horn (H3)

Remove bolt (3) to do this.

4

Install in the reverse order

Viitatut asiakirjat