Remove/install anti-theft alarm (ATA) control unit

AR80.50-D-9830B

Remove/install anti-theft alarm (ATA) control unit

10.01.2020

Model

901.6, 902.6, 903.6, 904.6, 905.6

with code FY1 (Anti-Theft Protection package)

Model

901.6, 902.6, 903.6, 904.6, 905.6

with code FZ4 (Anti-theft alarm system with interior protection and towing sensor)

Model

901.6, 902.6, 903.6, 904.6, 905.6

with code J67 (Anti-theft alarm system)

1

Fuse and relay holder

4

Connector

7

Connector

2

Screw

5

Screw

8

Connector

3

Cover

6

ATA [EDW] control unit

 

Remove/install

Topical note

Notes on battery

AH54.10-P-0001-01A

1

Open flap on the driver seat frame (arrow)

2

Unscrew fuse/relay holder (1)

 Lay fuse/relay holder down to the side with connected lines.

3

Pull driver seat fully forward (arrow)

4

Disconnect plug (4)

With CODE H16 (Seat heater for driver)

5

Remove cover (3) below driver seat

6

Remove ATA control unit (6)

7

Release plug (7, 8) from ATA control module (6) and disconnect (arrow)

8

Install in the reverse order

 When installing a new control unit, parameterize with Star Diagnosis.