AR80.35-D-4500A | Removing and installing control module of remote control | 28.9.98 |
MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (FZ1) Central locking with remote control
MODEL 903.462 /463
with CODE (FZ0) Central locking with master key
with CODE (ZB2) Fedex supply
D80.35-0009-12
1 Radio frequency remote control module
2 Connector
3 Phillips screw
4 Switch
5 Cover
6 Knee guard on driver's side
7 Phillips screw
8 Washer
9 Phillips screw
10 Washer
11 Connector
12 Vacuum line
13 Vacuum line
| Removal, installation | ||
1 | Disconnect ground lead on battery | ||
2 | Pull out cover (5) | ||
3 | Disconnect connector (11) from switch (4) for headlamp range control | ||
4 | Mark vacuum hoses (12, 13) on switch (4) for headlamp range control and disconnect | Installation: Observe location of vacuum hoses (12, 13) | |
5 | Remove left knee guard on driver's side (6) | ||
6 | Press electric leads obstructing access to Phillips screws (3) to side. If applicable open cable strap | Installation: Replace opened cable strap. | |
7 | Remove connector (2) from radio frequency remote control module (1) | ||
8 | Remove radio frequency remote control module (1) from firewall | Access to Phillips screws (3) is difficult. | |
9 | Install in opposite order | ||
10 | Code radio, set clock |