Repair materials
Number | Designation | Order number |
BR00.45-Z-1133-02A | Loctite 243 | A 613 989 09 71 |
D72.16-1136-06
Adjust evenness in relation to sliding door portal pillars
1 Loosen nuts (1).
2 Adjust evenness by moving (arrow) upper carriage (2).
3 Loosen nut (3), if necessary also screws (4).
4 Adjust evenness by moving (arrow) roller (5) and/or bottom carriage (6).
5 Retighten nuts (1, 3) and screws (4) following adjustment.
D72.16-1139-06
Adjust rear installation depth
6 Unscrew screws (7) one after the other, apply Loctite 243 glue and screw in screws (7) again.
7 Adapt striker eye (8) by horizontally moving (arrow) to modified door adjustment.
8 Tighten screws (7).
The installation depth in the area of the rear door pillar (9) should be flush up to 1 mm lower to avoid wind noises.