D72.16-1131-09
Adjust gaps A and B
Gap A can only be changed slightly since the sliding door (1) is screwed tightly to the middle carriage.
1 Loosen nut (2).
2 Turn screw (3) in desired direction.
3 Retighten nut (2) following adjustment.
D72.16-1142-06
Move sliding door to front or rear within sliding door portal
Measure gap to be changed before opening sliding door (1).
4 Open sliding door (1) to stop.
Secure sliding door (1) against falling down with jack stands
5 Screw out screws (4).
6 Insert or remove spacers (5).
7 Screw in screws (4), tighten.
D72.16-1133-06
Adjust striker eye
4 Loosen screws (6) for striker eye (7) and adapt striker eye to fit modified door adjustment by vertically moving (arrow) striker eye (7).
5 Tighten screws (6).
Do not lift or pull down sliding door (1) over striker eye (7) .
D72.16-1135-06
Adjust door arrester.
6 Loosen screws (8) of door arrester (9) and adapt door arrester to modified door adjustment by vertically (arrow) moving door arrester (9).
5 Tighten screws (8).
Do not lift or pull down sliding door (1) after adjusting with the door arrester (9).