Disassemble/assemble crank mechanism for hinged door

Tyyppi ar · aihe 72.15 · versio 0107 · 2003-09-15

Koskee: MODEL 901, 902, 903, 904, 905 MODEL 690.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

AR72.15-D-5615A

2.3.96

MODEL 901, 902, 903, 904, 905

MODEL 690.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

D72.15-0006-01

 	Disassemble/assemble
1	Remove crank mechanism		AR72.15-D-5605A
2	Drill out pop rivet heads on crank mechanism carrier plate	 Drill bit diameter 4.8 mm.
		 Installation: Replace blind rivet.
3	Remove crank mechanism from carrier plate
4	Assemble in reverse order