AR72.15-D-2150B | Removing and installing door liner on hinged door | 19.7.99 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (V50) Power windows (2 doors)
MODEL 690.6 with CODE (V50) 2 power windows
D72.15-1108-09
1 Handle recess
2 Switch cover
3 Screw
6 Fuse
7 Cable
4 Door pocket
5 Door paneling
| Removal, installation | ||
1 | Remove handle shell (1) | Press retaining clip upward through cutout in handle shell with screwdriver | |
2 | Unclip switch cover (2) and disconnect connector | A different number of switches may be fitted depending on vehicle equipment. Installation: Route leads below pull wire for door opener. | |
3 | Unscrew screws (3) | ||
4 | Fold open door pocket (4) | ||
5 | Slightly pull door paneling (5) upward and swing away slightly | The door opening lever is still connected with the control cable (7) | |
6 | Unlock retainer (6) and unclip pull wire (7) from door opening lever and door paneling | ||
7 | Remove door liner (5) | ||
8 | Install in the reverse order |