Hinged doors
Number | Designation | Model | Model | ||
BA72.15-N-1004-01A | Bolt, door hinge to B-pillar | Nm | 25 | 25 | |
BA72.15-N-1014-01A | Bolt, for locking bolt to C-pillar | Nm | 25 | 25 | |
D72.15-0011-01
Adjust installation depth at front
1 Loosen Torx screws (2) on door hinges.
2 Adjust door in relation to B-pillar to that it is flush or retracted a maximum of 1 mm
3 Tighten Torx screws (2)
D72.15-0012-01
Adjust rear installation depth
4 Loosen Torx screws (2).
5 Adjust installation depth by horizontally moving lock striker.
Adjust door flush to max. 1 mm extension.
Rotary tumbler should engage in the center of the striker eye.
6 Tighten Torx screws (2)