ar7212p1910f

Removing and installing crank operated window in rear door

Tyyppi ar · aihe 72.12 · versio 0100 · 1997-04-25

Koskee: MODEL 210

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 72 Ovet › 72.12 Takaovi — Mallisarja 210

EinPAS 36 Näkyvyys › 36.15 Lasilevy/ikkuna › 36.15.41 Sivuikkuna — Mallisarja 210

AR72.12-P-1910F

Removing and installing crank operated window in rear door

9.3.95

MODEL 210

Removing and installing crank operated window in rear door

1 Crank operated window

2 Retaining bracket

3 Slider

4 Window lift rail

5 Inner sealing rail

6 Outer sealing rail

7 Trim strip

8 Window guide rail

9 Window lift

P72.12-0205-03

Removal, installation

1

Remove door liner on rear door

AR72.12-P-1010F

2

Remove foil on inner door panel in lower area

Before installing foil check crank operated window for easy motion

3

Remove sealing rail on inside

AR72.10-P-1600E

4

Remove sealing rail on outside

AR72.10-P-1700E

5

Unclip retaining bracket (2) on window lift rail (4)

6

Extend crank operated window (1) toward rear out of slider (3) together with window lift rail (4) and set down inside door

7

Remove window guide rail (8)

Coat with solution of soap and water when installing

8

Remove stationary window in rear door

Only remove window stay

AR72.12-P-1970E

9

Remove crank operated window (1) upward out of window shaft

10

Reinstall in opposite order

Viitatut asiakirjat