P72.10-3015-08
Shown on left door foil
1 Door foil
2 Electrical connectors
3 Electrical connector
(with code (889) Keyless go)
4 Butyl cord
H4/2h1 Tweeter
H4/2h2 Woofer
N69/1 Left front door control unit
N69/2 Right front door control unit
5 Inner door panel
6 Bowden cable
H4/1h1 Tweeter
H4/1h2 Woofer
| Remove | ||
1 | Remove left front door control unit (N69/1) or right front door control unit (N69/2) | ||
2 | Electrical connector from woofer (H4/1h2) or woofer (H4/2h2) | ||
3 | Disconnect electrical connectors (2). | ||
4.1 | Separate electrical connector (3) | On vehicles with code (889) Keyless go | |
5 | Loosen butyl cord (4) on rear of door foil (1) from inner door panel (5) with suitable cutting blade or cut | Carefully loosen butyl cord (4) from inner door panel (5)Danger of corrosion damage if paint on inner door panel (5) is damaged | |
It is only necessary to partially loosen the door foil (1) from the inner door panel (5) to reach components covered by it | |||
6 | Remove Bowden cable (6), electrical lines and tweeter (H4/1h1) or tweeter (H4/2h1) through door foil (1) and remove door foil (1) | ||
| Install | ||
7 | Check door foil (1) for damage, replace if necessary | When replacing door foil (1) remove butyl cord (4) residues from inner door panel (5) and clean gluing surfaces. | |
Cleaner | |||
8 | Check butyl cord (4) for damage, replace if necessary | If the butyl cord is partially damaged (4) replace only the damaged section of the butyl cord (4). Lay new butyl cord (4) parallel to damaged butyl cord (4) on door foil (1)Remove butyl cord (4) residues from inner door panel (5) and clean gluing areas | |
Sealing cord | |||
Cleaner | |||
9 | Install Bowden cable (6), electrical lines and tweeter (H4/1h1) or tweeter (H4/2h1) in door foil (1) through corresponding openings | ||
10 | Place door foil (1) on the inner door panel (5) and roll on | Observe installation position of door foil (1) on inner door panel (5). | |
| |||
11 | Connect electrical connector to woofer (H4/1h2) or woofer (H4/2h2) | ||
12 | Connect electrical connectors (2) | ||
13.1 | Connect electrical connector (3) | On vehicles with code (889) Keyless go | |
14 | Install left front door control unit (N69/1) and right front door control unit (N69/2) |
Roller
168 589 05 63 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1086-01A | Soft top frame sealing profile with metal core 35 m, SEALANT/butyl Bostik 1127 | A 005 989 12 71 10 |
BR00.45-Z-1025-04A | Cleaner | A 005 989 19 71 |