1 | Caps |
2 | Bolts |
3 | Grab handle |
S68.30-4540-01
S68.30-4541-01
Vehicles with code LD5 (additional interior lamp in the passenger compartment) /code VP3 (AMBIENTE equipment line) |
3 | Grab handle |
6 | Electrical connector |
S68.30-4542-01
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Switch off the ignition and remove the transmitter key from the EIS control unit | Only with model 639.603/703 with engine 780.994 with code MA0 (E-CELL 60 kW) | |
| |||
2 | Fold up the covers (1) | ||
3 | Remove screw/bolts (2) | ||
4 | Remove the grab handle (3) | Installation: Make sure that the grab handle (3) is correctly seated. | |
5 | Disconnect the electrical connector (6) on the grab handle (3) | Only with code LD5 (additional interior lamp in the passenger compartment), with code VP3 (AMBIENTE equipment line) | |
6 | Install in the reverse order | ||
| Check | ||
7 | Check the function of the interior light in the grab handle (3) | Only with code LD5 (additional interior lamp in the passenger compartment), with code VP3 (AMBIENTE equipment line) |
Viitatut asiakirjat
- ah0000z030001a Yleisiä ohjeita liittyen autoihin, joissa on kj.-sähköjärjestelmä ja/tai litiumioniakku ja/tai kaasuvoimansiirtojärjestelmä sekä henkilökohtaisiin suojavarusteisiin
- as0000z003501a Hengenvaara suoritettaessa töitä rakenneosille ja järjestelmille, joissa on U >= 30 V vaihtojännite (AC) tai U >= 60 V tasajännite (DC)