Repair materials
Number | Designation | Order number |
BR00.45-Z-1141-02A | TS adhesive (with isopropanol cleaner) | A 451 989 00 71 |
P67.10-2172-06
When reusing windshield (1) do not damage guides (arrows) in upper area of windshield (1).
The guides (arrows) are located on the windshield (1) approx. 15.5 cm away from the corners of headliner and are concealed by the latter. The guides (arrows) are shown without headliner, for better illustration.
P67.10-2171-06
1 Lightly pull headliner downward in area of left and right guides (arrow) and carefully loosen left and right guide (arrow) from windshield (1) with blade (4)
Carefully loosen left and right guide (arrow) to prevent damaging windshield (1) or headliner
When reusing removed windshield (1).
Left and right guide (arrow) shown without headliner, for better illustration.
2 Heat cutting wire and route through adhesive bead of windshield (1)
"Veritrac" window removal tool
gotis://K_67.0_01.0
3 Cut adhesive bead out of windshield (1) with cutting wire.
"Veritrac" window removal tool
gotis://K_67.0_01.0
When cutting out, ensure that handle with the wire guide (5) is pressed firmly into the adhesive bead in the area of the instrument panel. This is only possible on the outer areas (up to approx. 20 cm away from the A-pillar). The dashboard can be damaged if this is not observed.
Aid of helper required.
4 Remove windshield (1) from body using cup suction tools.
Cup suction tool
gotis://K_67.0_03.0
Aid of helper required.
5 Unclip guides (arrows) on windshield (1) from front roof frame and remove