Mallisarjat
fi
ar6520w100605c
Install front roof frame
Tyyppi ar · aihe 65.20 · versio 0100 · 2006-07-25
Koskee: BODY 375.810 in MODEL 375.3 with CODE (DD5) Cab with high roof BODY 375.830 in MODEL 375.1 with CODE (DD5) Cab with high roof BODY 375.840 in MODEL 375.4 with CODE (DD5) Cab with high roof BODY 940.899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (DD5) Cab with high roof BODY 944.899 in MODEL 944.0 /2 with CODE (DD5) Cab with high roof BODY 972.899 in MODEL 970, 972, 974, 975, 976 with CODE (DD5) Cab with high roof
Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.
Sijainti
Toimintoryhmä 3 Kori, päällysrakenne › 65 Katto › 65.20 Kattokehys — Mallisarja 375 (mallit 1**, 3**, 4**, 810, 830, 840) · Mallisarja 940 (mallit 899) · Mallisarja 944 (mallit 0**, 2**, 899) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**) · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976
EinPAS 35 Kori/runko/liittyvät osat › 35.39 Katto › 35.39.30 Katon sivupelti/katon kehys — Mallisarja 375 (mallit 1**, 3**, 4**, 810, 830, 840) · Mallisarja 940 (mallit 899) · Mallisarja 944 (mallit 0**, 2**, 899) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**) · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976
AR65.20-W-1006-05C
Install front roof frame
Commercially available tools
Number
Designation
WH58.30-Z-1003-01A
Electrode miller
WH58.30-Z-1003-02A
Clamping pliers
WH58.30-Z-1031-02A
C-clamp
WH58.30-Z-1001-03A
Round wire brush, braided, dia. 70 mm
WH58.30-Z-1024-04A
Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)
WH58.30-Z-1001-40A
Tarp (fire-resistant)
WE58.40-Z-1001-02A
Inert gas welder
WE58.40-Z-1002-02A
Spot welder
WE58.40-Z-1001-03A
Drill (electric/pneumatic)
WE58.40-Z-1003-03A
Angle grinder (electric/pneumatic)
WE58.40-Z-1005-03A
Wet/dry vacuum cleaner
1 Fit roof frame bottom section and fasten with clamping pliers.
2 Roof frame bottom section .
3 Clean welds with wire brush.
4 Prime roof frame bottom section in shaded areas.
Later painting not possible.
5 Fit roof frame top section and fasten with clamping pliers.
6 Roof frame top section .
7 Roof frame top section in areas A and B .
8 Clean all welds with wire brush.
For reasons of stability and costs, do not grind down welds in area which is not visible.
