ar6520w100602c

Separate front roof frame

Tyyppi ar · aihe 65.20 · versio 0100 · 2006-10-31

Koskee: BODY 375.810 in MODEL 375.3 with CODE (DD5) Cab with high roof BODY 375.830 in MODEL 375.1 with CODE (DD5) Cab with high roof BODY 375.840 in MODEL 375.4 with CODE (DD5) Cab with high roof BODY 940.899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (DD5) Cab with high roof BODY 944.899 in MODEL 944.0 /2 with CODE (DD5) Cab with high roof BODY 972.899 in MODEL 970, 972, 974, 975, 976 with CODE (DD5) Cab with high roof

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 65 Katto › 65.20 Kattokehys — Mallisarja 375 (mallit 1**, 3**, 4**, 810, 830, 840) · Mallisarja 940 (mallit 899) · Mallisarja 944 (mallit 0**, 2**, 899) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**) · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976

EinPAS 35 Kori/runko/liittyvät osat › 35.39 Katto › 35.39.30 Katon sivupelti/katon kehys — Mallisarja 375 (mallit 1**, 3**, 4**, 810, 830, 840) · Mallisarja 940 (mallit 899) · Mallisarja 944 (mallit 0**, 2**, 899) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**) · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976

AR65.20-W-1006-02C

Separate front roof frame

Separate front roof frame

Welding spot milling cutter

201 589 00 51 00

Commercially available tools

Number

Designation

WH58.30-Z-1002-01A

Ball cutter, dia. 12 mm

WH58.30-Z-1006-01A

Vario Drill WS 91 spot weld removing tool

WH58.30-Z-1001-03A

Round wire brush, braided, dia. 70 mm

WH58.30-Z-1021-04A

Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm)

WH58.30-Z-1024-04A

Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)

WH58.30-Z-1001-40A

Tarp (fire-resistant)

Workshop equipment

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

WE58.40-Z-1004-03A

Body saw (electric/pneumatic)

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Separate front roof frame

W65.20-1025-09

1 Expose spot welds in areas A and B and cut out.

2 Cut along dotted lines to reach welding points in
areas C and D.

3 Remove sections.

4 Expose spot welds in areas C and D and cut out.

Separate front roof frame

W65.20-1026-07

5 Expose spot welds in areas E and F and cut out.

6 Take off roof frame.

Separate front roof frame

W65.20-1027-07

7 Grind connection surfaces down to bare metal on both sides in areas G and H.

8 Grind spot welding flanges down to bare metal on both sides in shaded areas and coat insides of spot welding flanges with zinc dust paint.