ar6510w102003b

Install and weld in side roof paneling

Tyyppi ar · aihe 65.10 · versio 0100 · 2006-07-26

Koskee: BODY 375.810 in MODEL 375.3 with CODE (DD5) Cab with high roof BODY 375.830 in MODEL 375.1 with CODE (DD5) Cab with high roof BODY 375.840 in MODEL 375.4 with CODE (DD5) Cab with high roof BODY 940.899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with CODE (DD5) Cab with high roof BODY 944.899 in MODEL 944.0 /2 with CODE (DD5) Cab with high roof BODY 972.899 in MODEL 970, 972, 974, 975, 976 with CODE (DD5) Cab with high roof

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 65 Katto › 65.10 Kattopelti — Mallisarja 375 (mallit 1**, 3**, 4**, 810, 830, 840) · Mallisarja 940 (mallit 899) · Mallisarja 944 (mallit 0**, 2**, 899) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**) · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976

EinPAS 35 Kori/runko/liittyvät osat › 35.39 Katto › 35.39.30 Katon sivupelti/katon kehys — Mallisarja 375 (mallit 1**, 3**, 4**, 810, 830, 840) · Mallisarja 940 (mallit 899) · Mallisarja 944 (mallit 0**, 2**, 899) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**) · Mallisarja 970 · Mallisarja 972 · Mallisarja 974 · Mallisarja 975 · Mallisarja 976

AR65.10-W-1020-03B

Install and weld in side roof paneling

Commercially available tools

Number

Designation

WH58.30-Z-1003-01A

Electrode miller

WH58.30-Z-1003-02A

Clamping pliers

WH58.30-Z-1031-02A

C-clamp

WH58.30-Z-1001-03A

Round wire brush, braided, dia. 70 mm

WH58.30-Z-1024-04A

Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)

WH58.30-Z-1001-40A

Tarp (fire-resistant)

Workshop equipment

WE58.40-Z-1001-02A

Inert gas welder

WE58.40-Z-1002-02A

Spot welder

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner

Install and weld in side roof paneling

W65.10-1050-01

1 Fit side roof paneling and fasten with clamping pliers.

Install and weld in side roof paneling

W65.10-1047-09

2 Side roof paneling .

3 Drill 4 mm dia. hole in area C and countersink with 8 mm dia. bit on one side.

3 Side roof paneling in areas A to H .

Weld area C from countersunk side, weld area F on both sides.

Install and weld in side roof paneling

W65.10-1061-01

4 Align roof bow at side roof paneling and tack weld.

5 Side roof paneling in areas J and K .

6 Grind all plug welds down flat

7 Clean all other welds with wire brush.