P64.20-3992-12
1 Scribe cut along broken line in area A according to old part of rear floor assembly (1) removed.
The new part must be approx. 2.5 cm longer than the removed old part to achieve a lap joint when installed.
2 Cut along broken line in area A on rear floor assembly (1).
P64.20-3991-09
3 Drill holes for plug welding in areas E and F on rear floor assembly section (1.1) and grind mating surfaces down to bare metal on both sides.
4 Grind mating surfaces down to bare metal in areas B to D on rear floor assembly section (1.1) on both sides.