Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
P64.20-4307-06
1 Expose spot welds in area A on complete rear longitudinal member (1) and cut out.
P64.20-4298-06
2 Expose spot welds in areas B to E on complete rear longitudinal member (1) and cut out.
P64.20-4304-09
Removal of complete rear longitudinal member (1) is shown with undamaged crossmember (2)
3.1 Expose spot welds in areas F to H on complete rear longitudinal member (1) and cut out.
With crossmember (2) not damaged
3.2 Cut out spot welds in areas F to H on opposing side of crossmember (2)
With damaged crossmember (2), because it is removed with complete rear longitudinal member (1)
4 Remove complete rear longitudinal member (1) with or without crossmember (2) depending on damage