ar6330p114302ff

Partially prepare longitudinal member inner shell on entrance

Tyyppi ar · aihe 63.30 · versio 0101 · 2007-06-18

Koskee: MODEL 454.0

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 63 Sivuseinät › 63.30 Pitkittäispalkit — Mallisarja 454 (mallit 0**)

EinPAS 35 Kori/runko/liittyvät osat › 35.34 Sivuseinä › 35.34.41 Kannatin/pyöränkotelo — Mallisarja 454 (mallit 0**)

AR63.30-P-1143-02FF

Partially prepare longitudinal member inner shell on entrance

Partially prepare longitudinal member inner shell on entrance

P63.30-2412-06

1 Scribe cut along broken line in area E on longitudinal member inner shell (1) according to old part removed.

2 Cut along broken line in area E on longitudinal member inner shell (1).

3 Grind mating surface down to bare metal in area D on front longitudinal member inner shell section (1.1) on one side.

4 Grind mating surface down to bare metal in area B on front longitudinal member inner shell section (1.1) on one side.

5 Grind mating surface down to bare metal in area C on front longitudinal member inner shell section (1.1) on both sides.

6 Grind mating surface down to bare metal in area A on front longitudinal member inner shell section (1.1) on both sides. Coat insides of spot weld flanges with zinc dust paint.