Commercially available tools
Number | Designation | |
WH58.30-Z-1003-01A | Electrode miller | |
WH58.30-Z-1003-02A | Clamping pliers | |
WH58.30-Z-1031-02A | C-clamp | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-02A | Inert gas welder |
WE58.40-Z-1002-02A | Spot welder |
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
P63.30-2226-08
1 Fit longitudinal member outer shell (1) and fasten with clamps.
2 Fasten longitudinal member outer shell (1) to body with tack welds.
3 Weld in longitudinal member outer shell (1) in areas A and B with .
4 Weld longitudinal member outer shell (1) in area C with .
Complete other required spot welds together with side wall paneling.
5 Grind down all spot welds flat if required.
6 Clean all other spot welds with wire brush.