201 589 00 51 00
Spot weld cutter
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D63.30-0020-06
1 Mark separation line (2) on door frame paneling at a distance of
a = approx. 25 mm measured from edge (arrow).
2 Mark separation line (3) on door frame paneling at a distance of
b = approx. 25 mm measured from edge (arrow).
3 Expose spot welds (arrows) and cut out.
Cutting depth in area of spot welds max. 1 mm.
4 Separate door frame paneling bottom section (1) along marked separation lines
(2 and 3).
5 Cut spot welds (arrows) out of door frame paneling bottom section (1).
D63.30-0022-03
D63.30-0011-12
6 Cut spot welds (arrows) out of door frame paneling bottom section (1).
D63.30-0021-04
7 Cut spot welds (arrows) out of door frame paneling bottom section (1).