P63.20-6185-09
1 Install A-pillar outer section (1), fit and fasten using vise grip pliers and C-clamps.
2 A-pillar outer section (1) in illustrated areas .
P63.20-6186-05
3 A-pillar outer section (1) in illustrated areas .
P63.20-6187-06
4 A-pillar outer section (1) in areas A and B .
Weld though inert gas welds in areas A and B. Perform welding in intervals, allow to cool down in between. This ensures minimum heat distortion.
5 Grind inert gas welds down flat in areas A and B and clean with wire brush.
6 Grind all required spot welds down flat
7 Clean all other spot welds with wire brush
P63.20-6188-06
8 Fill unevenness in cross-hatched areas on A-pillar outer section (1) with filling solder and then grind down flat.