ar6320p009804ff

Install C-pillar paneling and weld in.

Tyyppi ar · aihe 63.20 · versio 0101 · 2007-06-13

Koskee: MODEL 454.0 Nur wenn keine darunterliegenden Verstärkungen oder Blechteile erneuert wurden'

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 63 Sivuseinät › 63.20 Pilarit — Mallisarja 454 (mallit 0**)

EinPAS 35 Kori/runko/liittyvät osat › 35.34 Sivuseinä › 35.34.45 Pilari — Mallisarja 454 (mallit 0**)

AR63.20-P-0098-04FF

Install C-pillar paneling and weld in.

Install C-pillar paneling and weld in.

P63.20-6168-06

1 Install C-pillar paneling (1), fit and fasten using vise grip pliers and C-clamps.

2 Position rear roof frame (2) and mark holes for plug welding in area A on C-pillar paneling (1)

3 Remove C-pillar paneling (1) and drill marked holes in area A on C-pillar paneling (1).

4 Install C-pillar paneling (1), fit and fasten using vise grip pliers and C-clamps.

Check course and condition of sealant, correct if necessary.

Install C-pillar paneling and weld in.

P63.20-6169-06

5 C-pillar paneling (1) in illustrated areas .

Install C-pillar paneling and weld in.

P63.20-6170-12

6 C-pillar paneling (1) in illustrated areas .

Install C-pillar paneling and weld in.

P63.20-6171-06

7 C-pillar paneling (1) in illustrated areas .

Install C-pillar paneling and weld in.

P63.20-6172-06

8 C-pillar paneling (1) in areas B and C .

Weld trough inert gas welds in areas B and C. Perform welding in intervals, allow to cool down in between. This ensures minimum heat distortion.

9 Grind inert gas welds down flat in areas B and C and clean with wire brush.

10 Grind all required spot welds down flat

11 Clean all other spot welds with wire brush

Install C-pillar paneling and weld in.

P63.20-6173-06

12 Fill unevenness in cross-hatched areas on C-pillar paneling (1) with filling solder and then grind down flat.