201 589 00 51 00
Spot weld cutter
Commercially available tools
Number | Designation | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1002-03A | Straight grinder (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D63.20-1109-06
1 Expose spot welds in the areas (A, B and C) and cut out.
2 Expose spot welds in the areas (D and E) and cut out.
D63.20-1110-03
D63.20-1111-09
3 Mark separation line (5) with length of a = 350 mm
at edge of A-pillar (arrow) on body.
4 Draw separation line (6) at the edge of the A-pillar (arrow), as indicated.
5 Draw separation line (7) along the sheet metal contours (arrows) on the body.
6 Detach part of inside section of A-pillar (2) along the separating lines (5, 6 and 7) and remove.
Cutting depth in area of separation line (5) max. 1 mm.
7 Bend up A-pillar sheet (8) slightly in the areas (G and H) of the cut out spot welds and grind off spot weld residue on the remaining A-pillar inside part as well as on the weld web of the splash wall (9), area F.
D63.20-1112-03