201 589 00 51 00
Spot weld cutter
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D63.20-0005-06
1 Expose and mill out weld spots in areas (A, B and G).
2 Expose spot welds in the areas (C and D) and cut out.
D63.20-1106-03
D63.20-1102-09
3 Mark separation line (3) with length of a = 350 mm at edge of A-pillar (arrow) on body.
4 Mark separation line (4) at edge of A-pillar (arrow) as indicated.
5 Draw separation line (5) on body along panel contours (arrows).
6 Separate A-pillar inner section (2) along separation lines (3, 4 and 5) and remove.
Cutting depth along separation line (3) max. 1 mm.
7 Slightly bend A-pillar panel (6) up in areas (F, H) of cut out spot welds and grind off spot weld residues from remaining A-pillar inner section as well as on weld web of splash wall (7), area E.
D63.20-1107-03