ar6320d000602a

Preparing right C-pillar paneling bottom section for installation

Tyyppi ar · aihe 63.20 · versio 0109 · 2006-10-31

Koskee: MODEL 901.32 /42 /62, 902.32 /42 /62, 903.02 /32 /42 /62, 904.32 /42 /62, 905.62 MODEL XD2, XD3, XD4, XD5, XD6, XD7 MODEL 903.62, 904.62 with CODE (ZU9) National version for Mexico

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 63 Sivuseinät › 63.20 Pilarit — Mallisarja 901 (mallit 32*, 42*, 62*) · Mallisarja 902 (mallit 32*, 42*, 62*) · Mallisarja 903 (mallit 02*, 32*, 42*, 62*) · Mallisarja 904 (mallit 32*, 42*, 62*) · Mallisarja 905 (mallit 62*)

EinPAS 35 Kori/runko/liittyvät osat › 35.34 Sivuseinä › 35.34.45 Pilari — Mallisarja 901 (mallit 32*, 42*, 62*) · Mallisarja 902 (mallit 32*, 42*, 62*) · Mallisarja 903 (mallit 02*, 32*, 42*, 62*) · Mallisarja 904 (mallit 32*, 42*, 62*) · Mallisarja 905 (mallit 62*)

AR63.20-D-0006-02A

Preparing right C-pillar paneling bottom section for installation

Workshop equipment

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

WE58.40-Z-1004-03A

Body saw (electric/pneumatic)

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

Preparing right C-pillar paneling bottom section for installation
Preparing right C-pillar paneling bottom section for installation

D63.20-0021-02

D63.20-0020-02

1 Mark separation line (dotted line, 3) on right C-pillar paneling (2) in character bead with the following dimension:

a = approx. 25 mm.

2 Separate paneling (2) along marked separation line (dotted line, 3).

3 Grind right C-pillar paneling bottom section (1) down on both sides in marked area (4) and coat with zinc dust paint

4 Position paneling (1), align and clamp in place.