P65.10-3541-06
Adhesive kit for isopropanol cleaner
4 Adhesive cartridge
6 Primer stick
8 Cleaning cloth
9 Cloth
10 Spacer
11 Cutting wire
12 Application nozzle
13 Wool wiper
P62.25-2568-05
Do not apply primer to remaining adhesive in bonding area (1). The gluing area (1) on the body flange must be absolutely free of dust and grease to prevent paint adhesion problems of the adhesive material.
Cut back remaining adhesive material max. 15 minutes before applying new adhesive bead, because the adhesive material on the cutting surface reacts with the ambient air which can lead to adhesion problems.
1 Cut off residual adhesive material on bonding area (1) down to a height of max. 2 mm using suitable scraper. Remove adhesive material residues.
2 Clean painted adhesive surface in bonding area (1) with cleaning cloth included in repair kit.
3 Repair paint damage in bonding area (1) with primer applicator.
4 Apply primer to bonding area (1) using primer stick from repair kit, in areas where residual adhesive material is missing or damaged.
Allow primer to flash off for min. 10 - 15 minutes.