Removing and installing front end paneling

Tyyppi ar · aihe 62.10 · versio 0102 · 2004-10-21

Koskee: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

AR62.10-D-5750A

6.11.95

MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

D62.10-0001-09

 	Removal, installation
1	Remove front bumper		AR88.20-D-2000B
2	Remove turn signal lamps and front end center element (a) with head lamps		AR88.30-D-2302A
3	Unscrew bolts (7) on A-pillar
4	Remove sealant (18) between wheelhouse and fender
5	Unscrew bolts (19, 20, 21 and 22)
6	Drill out spreading pins (24) and pull off bumper mount (23)
7	Pull connector off of auxiliary turn signal lamp
8	Remove fender	Remove sealant residues.
9	Reinstall in opposite order	 Before installing spray fender on inside with underbody protection agent. Seal inside of fender at wheel well and wheel well transition.