201 589 00 51 00
Spot weld miller
Commercially available tools
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
D61.10-0064-03
D61.10-0063-03
1 Mark separation line (6) in center of front floor (1).
Cut spot welds out through cargo space floor and floor panel in one step.
2 Expose spot welds in area (A) up to behind separating line (6) and cut out.
D61.10-0065-06
3 Expose spot welds in area (B) of front floor (1) and cut out.
4 Expose spot welds in area (C) of front floor (1) and grind down.
5 Expose all spot welds of front floor (1) in shaded area up to separation line (6) and cut out.
D61.10-0066-03
D61.10-0067-06
6 Mark separation line (8) along bracket (9) on front floor (1)
Cutting depth in area of lateral struts (10) and reinforcement bracket (9) max. 1 mm.
7 Separate front floor (1) along separation lines (6 8).
D61.10-0086-01
8 Expose spot welds at firewall in area (D) and cut out.