ar6080w0120a

Remove/install cab locks

Tyyppi ar · aihe 60.80 · versio 0106 · 2012-02-23

Koskee: MODEL 375.3 with BODY 375.810 MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 60 Kori, päällysrakenne (yleistä) › 60.80 Ohjaamo, ohjaamon kiinnitys — Mallisarja 375 (mallit 3**, 810) · Mallisarja 940 (mallit 899) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**)

EinPAS 35 Kori/runko/liittyvät osat › 35.50 Ohjaamon kiinnitys/-kippilaite/-ilmajousitus › 35.50.40 Ohjaamon kiinnitys/ohjaamon kippilaite — Mallisarja 375 (mallit 3**, 810) · Mallisarja 940 (mallit 899) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**)

AR60.80-W-0120A

Remove/install cab locks

16.2.12

MODEL 375.3 with BODY 375.810

MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899

Remove/install cab locks

W60.80-1006-12

1 Cab lock

2 Hexagon bolt

3 Hydraulic connection

4 Tie strap

5 Connector

6 Retaining bracket

7 Hexagon nut

Remove/install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground lead from battery

Notes on battery

All models

AH54.10-P-0001-01A

Danger!

Risk of injury caused by being caught or pinched as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

2

Tilt cab

3

Disconnect cable strap (4) on lines to lock (1)

4

Disconnect hydraulic connector (3)

5

Disconnect electrical connector (5) to lock switch

6

Remove cab lock (1)

*BA60.80-N-1013-01B

7

Install in the reverse order

Cab mounting

Number

Designation

Body
375.810 /820
in model 375.3

Body
940.890/899 in model 950.5/6, 952.5/6, 953.6, 954.5

BA60.80-N-1013-01B

Nut, rear cab locks to retaining bracket

Nm

100

100

Viitatut asiakirjat