ar5465p0001rt

Remove/install Parktronic system (PTS) sensors in front bumper

Tyyppi ar · aihe 54.65 · versio 0101 · 2008-12-15

Koskee: MODEL 251 with CODE (220) Parktronic System (PTS)

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 54 Sähkölaitteet, sähkövarusteet ja mittarit › 54.65 Pysäköintitutka — Mallisarja 251

EinPAS 28 Mukavuus-/ajoavustinjärjestelmä › 28.15 Pysäköintiavustin › 28.15.12 Tunnistin/katkaisin/johtosarja — Mallisarja 251

AR54.65-P-0001RT

Remove/install Parktronic system (PTS) sensors in front bumper

5.12.08

MODEL 251 with CODE (220) Parktronic System (PTS)

Remove/install Parktronic system (PTS) sensors in front bumper

4 Outer cover

P54.65-3894-03

Remove/install Parktronic system (PTS) sensors in front bumper

P54.65-3118-06

1 Connector

2 Lock

3 Sealing ring

B8/1 Outer left front PTS ultrasonic sensor

B8/2 Center left front PTS ultrasonic sensor

B8/3 Inner left front PTS ultrasonic sensor

B8/4 Inner right front PTS ultrasonic sensor

B8/5 Center right front PTS ultrasonic sensor

B8/6 Outer right front PTS ultrasonic sensor

Remove/install

1

Unclip outer cover (4) with outer left front PTS ultrasonic sensor (B8/1) or outer cover (4) with outer right front ultrasonic sensor PTS (B8/6) from front bumper (arrow)

Danger of breaking! Carefully unclip outer cover (4).

Only vehicles except code (494), USA version on which only the outer left front PTS ultrasonic sensor (B8/1) or only the outer right front PTS ultrasonic sensor (B8/6) or only the two outer sensors are removed.

2

Remove front bumper

Put bumper down on a soft support so that the paint is not damaged.

AR88.20-P-2000RT

3

Detach connector (1) from the PTS ultrasonic sensor to be removed

4

Unlock and remove corresponding PTS ultrasonic sensor at the lock (2)

Installation: Check sealing ring (3) and replace if necessary.

5

Install in the reverse order

Viitatut asiakirjat