Removing and installing instrument cluster

Tyyppi ar · aihe 54.30 · versio 0107 · 2003-09-15

Koskee: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

AR54.30-D-6015C

30.6.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

D54.30-1101-06

1 Bolt

2 Cover

3 Bolt

4 Instrument cluster

5 Connector

6 WSP control unit

 	Remove/Install
1	Remove cover at instrument panel		AR68.10-D-1550A
2	Remove cover (2).	 Installation: Hook in cover at front first, then tighten screws at rear.
3	Remove screws (3) and take instrument cluster (4) off instrument panel
4	Remove immobilizer (WSP) control module (6)
5	Unlock connectors (5) and unplug from instrument cluster
6	Install in the reverse order	 Installation: Parameterize instrument cluster if replaced.
7.1	Set time at instrument cluster	Except for code J05/J19/ J28, tachograph.
8	Perform diagnosis quick test routine	 STAR DIAGNOSIS