AR46.10-W-0200A | Remove/install clock spring contact | 24.2.12 |
MODEL 375, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 958, 970, 972, 974, 975, 976
W46.10-1025-05
Illustrated on model 934
1 Cover
2 Bolts
3 Electrical connector (footwell)
A112 Clock spring contact
Modification notes
| Remove/install | ||
| Notes on working on the steering system in vehicles with airbag | ||
1 | Switch off ignition | ||
2 | Remove steering wheel | ||
3 | Remove cover in left footwell | Only the left-hand part of the cover. | |
4 | Disconnect electrical connector (3) of clock spring contact (A112) | Installation: Use new cable ties. | |
5 | Remove trim (1) of steering column | ||
6 | Remove bolts (2) | The bolts (2) are used to secure the clock spring contact (A112) together with a steering wheel angle sensor (B68) (if installed) to the steering column. | |
7 | Lift off clock spring contact (A112) | Remove the clock spring contact (A112) carefully so that the installation position of the steering wheel angle sensor (B68) (if installed) is not changed. | |
8 | Install in the reverse order |
Viitatut asiakirjat
- ah4600n000101a Ohjeita ohjaukseen liittyviin töihin kun autossa turvatyynyt
- ar4610w0100a