Remove/install ABS measuring ring

Tyyppi ar · aihe 42.30 · versio 0101 · 2005-07-12

Koskee: MODEL 613.355 with FRONT AXLE 739.234 with REAR AXLE 745.990 MODEL 613.355 /455 /485 with FRONT AXLE 739.234 with REAR AXLE 745.996 MODEL 613.355 /358 /388 with FRONT AXLE 739.234 with REAR AXLE 745.997

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 42 Jarrujen hydrauliikka ja mekaniikka › 42.30 Lukkiutumattomat jarrut (ABS) — Mallisarja 613 (mallit 355, 358, 388, 455, 485)

EinPAS 26 Aktiivinen turvajärjestelmä › 26.20 Jarru-/ pidonhallintajärjestelmä › 26.20.12 Tunnistin/katkaisin/johtosarja — Mallisarja 613 (mallit 355, 358, 388, 455, 485)

Koskee myös moottoreita/vaihteistoja: 739 234, 745 990, 745 996, 745 997

AR42.30-T-0160B

Remove/install ABS measuring ring

7.2.00

MODEL 613.355 with FRONT AXLE 739.234 with REAR AXLE 745.990

MODEL 613.355 /455 /485 with FRONT AXLE 739.234 with REAR AXLE 745.996

MODEL 613.355 /358 /388 with FRONT AXLE 739.234 with REAR AXLE 745.997

T42.30-0014-01

Illustration of front axle 739.234

 	Remove, Install
1	Remove rear wheel hub		AR35.20-T-0310B
2	Remove front wheel hub		AR33.20-T-0310B
3	Drive ABS measuring ring from wheel hub evenly in the direction of the arrow with a brass punch	Installation: Drive measuring ring evenly onto wheel hub up to the stop with a plastic mallet. For the rear wheel hub, the  drift must be used.	*745589011500
4	Install in the reverse order

Drift punch

745 589 01 15 00

Remove/install ABS measuring ring

Viitatut asiakirjat