Remove/install rear axle speed sensor · ar4230d0714b · Mercedes-Benz WIS

AR42.30-D-0714B

Remove/install rear axle speed sensor

11.11.08

MODEL 901, 902, 903, 904, 905 with CODE (BB0) Antilock brake system (ABS)

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6 with CODE (BB0) Antilock brake system (ABS)

D42.30-0060-05

1 Clamping bush

2 Rpm sensor

3 Shrink-fit sleeve

4 Heat-shrinkable tube

 	Remove/install
1	Pull rpm sensor and plug bushing out of mounting hole in axle supporting tube	 Installation: Refer to 
		Install rpm sensors	AR42.30-D-0712-02A
			*BR00.45-Z-1019-06A
 Danger!	Risk of injury caused by burns to skin and eyes. Risk of poisoning caused by inhaling fumes when working with heat-shrinkable tubing.	Work in well ventilated rooms only. Wear safety glasses with side protection and protective gloves.	AS00.19-Z-0001-01A
2	Cut through rpm sensor cable at easily accessible point	 Only required when replacing the rpm sensor.
		 Installation: Connect separated rpm sensor cables by means of heat-shrinkable sleeves and heat-shrinkable tube.	AR42.30-D-0712-01A
		Crimping pliers
		Hot-air gun
3	Install in the reverse order

Repair materials

Number	Designation	Order number
BR00.45-Z-1019-06A	ABS sensor grease	A 000 989 62 51 10

ar4230d071201a
ar4230d071202a
as0019z000101a Loukkaantumisvaara: ihon ja silmien palovammavaara. Myrkytysvaara: höyryjen hengittäminen kutistesukkia käsiteltäessä on vaarallista