ar4230b0150c

Remove/install ABS sensor

Tyyppi ar · aihe 42.30 · versio 0100 · 2016-02-12

Koskee: Vehicle 979 with Rear axle 743.4 with CODE B02 (Anti-block system (ABS) for brakes)Vehicle 979 with Front axle 732.5 with CODE B02 (Anti-block system (ABS) for brakes)

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 42 Jarrujen hydrauliikka ja mekaniikka › 42.30 Lukkiutumattomat jarrut (ABS) — Mallisarja 979

EinPAS 26 Aktiivinen turvajärjestelmä › 26.20 Jarru-/ pidonhallintajärjestelmä › 26.20.12 Tunnistin/katkaisin/johtosarja — Mallisarja 979

Koskee myös moottoreita/vaihteistoja: 732 5**, 743 4**

AR42.30-B-0150C

Remove/install ABS sensor

12.02.16

Vehicle 979 with Rear axle 743.4 with CODE B02 (Anti-block system (ABS) for brakes)

Vehicle 979 with Front axle 732.5 with CODE B02 (Anti-block system (ABS) for brakes)

Remove/install ABS sensor

W42.30-0001-01

Represented on front axle- Example

1 ABS sensor

2 Metal bushing

Remove/install ABS sensor

W42.30-0004-01

Represented on rear axle - Example

1 ABS sensor

2 Metal bushing

3 Protection sheet

Remove and install

1

Remove the ABS sensor (1) from the front axle

Do not pull the ABS sensor (1) by the cables

Installing: Lubricate the o ABS sensor (1) and insert it in the metallic bushing (2).

2

Remove the protection plate (3)

Only on axles with protection plate

2

Remove the ABS sensor (1) from the rear axle

Do not pull the ABS sensor (1) by the cables

Installing: Lubricate the o ABS sensor (1) and insert it in the metallic bushing (2).

3

Remove the brass bushing (2)

Installing: After cleaning its lodging, put a new bushing.

4

Install in reverse order