ar4220w0100f

Remove/install parking brake lever control unit

Tyyppi ar · aihe 42.20 · versio 0200 · 2020-06-17

Koskee: Model 963, 964

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 42 Jarrujen hydrauliikka ja mekaniikka › 42.20 Seisontajarru — Mallisarja 963 · Mallisarja 964

EinPAS 21 Jarrut/alipainelaite/paineilmajärj. › 21.16 Seisontajarru › 21.16.11 Ohjainlaite/rele — Mallisarja 963 · Mallisarja 964

AR42.20-W-0100F

Remove/install parking brake lever control unit

15.06.2020

Model

963, 964

Modification notes

10.02.2020

Release tool (1) added.

Operation step 3

Remove/install parking brake lever control unit

1

Unlocking tool

2

Electrical connector

3

Catch spring

A157

Parking brake lever control unit

W42.20-A014-76

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition.

2

Remove hazard warning system switch module.

AR54.25-W-3280H

3

Release parking brake lever control unit and pull out by operating parking brake lever.

To release, position release tool (1) at release point (arrow) behind parking brake lever control unit and push catch spring (3) downward.

Unlocking tool

*963589086300

4

Disconnect electrical connector (2) from parking brake lever control unit.

Installation:
Guide electrical wiring harness through lower cutout in center module.
Otherwise, the electric lines may be trapped and damaged during installation of the parking brake lever control unit.

5

Install in the reverse order

Remove/install parking brake lever control unit

963 589 08 63 00

Unlocking tool

Viitatut asiakirjat