ar4110p0050gi

Removing and installing propeller shaft

Tyyppi ar · aihe 41.10 · versio 0101 · 2000-06-21

Koskee: MODEL 163.172 /174 with one-piece propeller shaft

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 41 Nivelakseli › 41.10 Nivelakseli — Mallisarja 163 (mallit 172, 174)

EinPAS 17 Voimansiirtolinja/akseli › 17.40 Nivelakseli › 17.40.30 Nivelakseli voimansiirto/jokapyöräveto — Mallisarja 163 (mallit 172, 174)

AR41.10-P-0050GI

Removing and installing propeller shaft

18.11.98

MODEL 163.172 /174
with one-piece propeller shaft

Removing and installing propeller shaft

P41.10-2027-09

 	Removing, installing
1	Remove self-locking bolts (1b) with washers (1c) for propeller shaft (1) from transfer case	Installation: Ensure that the transfer case flange and the front propeller shaft are perfectly aligned.
		  Replace self-locking bolts (1b) and washers (1c).	*BA41.10-P-1001-01C
2	Remove self-locking bolts (1a) for propeller shaft (1) from rear axle center assembly	 Support propeller shaft.
		Installation: Ensure that the contact surfaces on the universal joint flange and rear axle flange are clean, and clean if necessary.
		 Replace self-locking bolts (1a).	*BA41.10-P-1002-01C
3	Remove propeller shaft towards the rear
	Checking
4	Check constant velocity joint and universal joints for wear or damage.	If necessary, replace propeller shaft complete.
5	Install in the reverse order

 Propeller shaft

Number	Designation		Model 163


BA41.10-P-1001-01C	Self-locking bolt, front propeller shaft to transfer case (to rear axle)	Nm	40
BA41.10-P-1002-01C	Self-locking bolt, rear propeller shaft to rear axle center assembly	Nm	50