N40.20-2059-01
N40.20-2058-01
P40.00-0040-01
| Install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Attach MB quick-clamp holders to front and rear wheels, remove clamping handles | The mounting bell is centered on the front wheel hub and rear axle shaft flange by locating the tracer pins in the 5 mounting holes (arrows) in the disk wheel. | |
Check MB quick-clamping holders, wheel mirrors and measurement pickups at regular intervals in accordance with the manufacturer's instructions. | |||
Quick clamping device | |||
2 | Attach wheel mirrors or measurement sensors | ||
| Remove | ||
3 | Detach wheel mirrors or measurement pickups | ||
4 | Attach clamping handles and remove MB quick-clamp holders on front and rear wheels |
124 589 01 31 00
Quick clamping device
Viitatut asiakirjat
- ah0000z030001a Yleisiä ohjeita liittyen autoihin, joissa on kj.-sähköjärjestelmä ja/tai litiumioniakku ja/tai kaasuvoimansiirtojärjestelmä sekä henkilökohtaisiin suojavarusteisiin
- as0000z003501a Hengenvaara suoritettaessa töitä rakenneosille ja järjestelmille, joissa on U >= 30 V vaihtojännite (AC) tai U >= 60 V tasajännite (DC)