ar4020p020001ac
Determining specified caster value with nomogram
Tyyppi ar · aihe 40.20 · versio 0113 · 2019-01-09
Koskee: Model 460, 461 Wheelbase 2400 mm Model 463 up to model year 2019 Wheelbase 2400 mm
Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.
Sijainti
Toimintoryhmä 2 Alusta › 40 Pyörät, alustanmittaus › 40.20 Alustanmittaus — Mallisarja 460 · Mallisarja 461 · Mallisarja 463
EinPAS 20 Alusta › 20.10 Alustanmittaus › 20.10.20 Diagnoosi/tarkastus/mittaus/säätö — Mallisarja 460 · Mallisarja 461 · Mallisarja 463
AR40.20-P-0200-01AC
| Determining specified caster value with nomogram
|
|
|
Model
| 460, 461
|
|
| Wheelbase 2400 mm
|
Model
| 463
|
|
| up to model year 2019
|
|
| Wheelbase 2400 mm
|
1
| Enter auxiliary dimension for rear axle (a) vertically into nomogram and at this point draw a line parallel to the existing lines.
|
2
| Enter supplementary dimension for front axle (b) horizontally in the nomogram and at this point draw a vertical line.
|
3
| Draw a horizontal line from the intersection point of the two lines and read off the specified caster value (c).
|
Nomogram for determining caster specified value (c) depending on the spring travel for a wheelbase of 2400 mm
|
a
| Supplementary dimension for rear axle
|
b
| Supplementary dimension for front axle
|
c
| Specified caster value
|
