ar3530p047503gh

Adjust gear backlash on differential assembly ring gear

Tyyppi ar · aihe 35.30 · versio 0108 · 2012-10-14

Koskee: MODEL 463 (except 463.270/271) /facelift 2012

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 35 Taka-akseli › 35.30 Vetopyörästö, vetoakselit — Mallisarja 460 · Mallisarja 461 (mallit 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Mallisarja 463 (mallit 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

EinPAS 17 Voimansiirtolinja/akseli › 17.51 Taka-akseli › 17.51.65 Takavetopyörästö/akselistoläpivienti — Mallisarja 460 · Mallisarja 461 (mallit 210, 211, 212, 213, 217, 218, 219, 227, 229, 238, 239, 249, 266, 267, 302, 304, 305, 310, 311, 312, 313, 317, 318, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 365, 366, 367, 368, 370, 371, 390, 391, 392, 394, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · Mallisarja 463 (mallit 200, 202, 204, 206, 207, 208, 209, 210, 215, 218, 220, 221, 222, 224, 225, 227, 228, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 254, 255, 260, 261, 272, 273, 274, 275, 276, 277, 280, 300, 303, 304, 306, 307, 308, 309, 315, 318, 320, 321, 322, 323, 324, 325, 327, 328, 330, 331, 332, 333, 335, 336, 338, 340, 341, 342, 343, 346, 348, 349, 350)

AR35.30-P-0475-03GH

Adjust gear backlash on differential assembly ring gear

MODEL	463 (except 463.270/271)
	/facelift 2012

Test values for ring gear with differential

Number	Designation		MODEL 460, 461, 463
BE35.30-P-1001-05A	Gear backlash	mm	0,1-0,15

Adjust gear backlash on differential assembly ring gear

001 589 53 21 00

Dial gage

363 589 02 21 00

Dial indicator holder

1	 Position dial indicator holder with  dial indicator on axle housing so that probe of  dial indicator is perpendicular to tooth flank.

2	Check the gear backlash by moving the ring gear to and fro.

 This procedure should be repeated on at least 4 positions on the circumference of the ring gear.

 The gear backlash is changed by replacing the shims between the axle housing and bearing. If a thinner shim is installed on one side, then a shim which is thicker to the same extent must be installed on the opposite side, in order to retain the bearing preload.

P33.30-0363-01