ar3530b467003b

Install joint flange at drive pinion

Tyyppi ar · aihe 35.30 · versio 0101 · 2019-04-20

Koskee: Rear axle 741.710, 746.209/233 in model 934.2, 938.1, 958.2/4 Rear axle 746.213/230 in model 934.2 Rear axle 746.213/230 in model 958.2/4 except code ZC8 (New Final Drive-Top Performance Light) Rear axle 748.590/594 in model 934.2, 958.4

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 35 Taka-akseli › 35.30 Vetopyörästö, vetoakselit — Mallisarja 934 (mallit 2**) · Mallisarja 938 (mallit 1**) · Mallisarja 958 (mallit 2**, 4**)

EinPAS 17 Voimansiirtolinja/akseli › 17.51 Taka-akseli › 17.51.65 Takavetopyörästö/akselistoläpivienti — Mallisarja 934 (mallit 2**) · Mallisarja 938 (mallit 1**) · Mallisarja 958 (mallit 2**, 4**)

Koskee myös moottoreita/vaihteistoja: 741 710, 746 209, 746 213, 746 230, 746 233, 748 590, 748 594

AR35.30-B-4670-03B

Install joint flange at drive pinion

Rear axle

741.710, 746.209/233 in model 934.2, 938.1, 958.2/4

Rear axle

746.213/230 in model 934.2

Rear axle

746.213/230 in model 958.2/4

except code ZC8 (New Final Drive-Top Performance Light)

Rear axle

748.590/594 in model 934.2, 958.4

Central actuation with differential

Number

Designation

Rear axle 741.710. 746.209/213/218/225/230/233/301/302/314/315

BA35.30-B-1002-03J

Shaft flange nut of on the through axle

M55X1.5

Nm

900

Central actuation with differential

Number

Designation

Rear axle 748.590/594

BA35.30-B-1002-03L

Actuation flange collar nut to the pinion

M55x1,5

Nm

900

Install joint flange at drive pinion

717 589 00 31 00

Retainer wrench

Install joint flange at drive pinion

1

Install the actuation flange (1).



2

Install a new collar nut (2).



3

Install the locking key in the actuation flange (1), and tighten the collar nut (2).  e .  .


Do not use a pneumatic device to tighten the collar nut (2) as this can damage the tapered roller bearings.


B35.30-0195-01

Install joint flange at drive pinion

4

Cut the nut locking lip at the locking groove region, bending the lock up to the bottom of the groove, in such a manner that the lock contacts the left side of the groove.


B35.30-0070-01