Wheel location, hub
Number | Designation | Front axles | ||
BA33.20-N-1007-01A | Bolt, driver to wheel hub | M121.5 | Nm | 160 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1012-01A | Omnifit FD 3041 sealant | A 002 989 47 20 10 |
N33.20-0456-01
Removal
1 Remove bolts from driver.
Use new bolts.
2 Detach driver with sealing ring.
3 Remove sealing ring from driver.
Check condition of sealing ring, replace if necessary.
Attaching
4 Clean contact surface of driver.
5 Coat contact surface of driver with sealing compound.
6 Push driver onto input shaft.
7 Fit and tighten bolts.
Observe tightening torque.
8 Insert sealing ring into driver.