Change parameters for the OBD NOx control torque limitation in the drive control (FR) control unit

AR30.35-G-1200B

Change parameters for the OBD NOx control torque limitation in the drive control (FR) control unit

17.8.11

Parameterize

1

Connect Star Diagnosis

 The vehicle battery must not be disconnected during the parameter change.

AD00.00-G-2000-04B

2

Switch on ignition

3

Start Diagnosis Assistance System (DAS)

4

Select "category UNIMOG"

5

Select "Control unit direct entry"

6

Select "Drive control (FR)"

7

Select "Control unit adaptations"

8

Select "Parameterization"

9

Select "Vehicle parameters"

10

Select "NOX torque limitation"

 Parameters 043.008.

11

Select and confirm corresponding value in the menu

 A 4-digit random number, the 8-digit ID code and calculation type XT is displayed in STAR DIAGNOSIS.

12

Enter the 4-digit random number, 8-digit ID code and the calculation type XT in the vehicle documentation system screen 1801

After entering the data the vehicle documentation system outputs a 12-digit encrypted random number.

13

Enter 12-digit encrypted random number in STAR DIAGNOSIS

14

Close Star Diagnosis