Install power take-off bearing cap

Tyyppi ar · aihe 26.45 · versio 0100 · 2009-03-18

Koskee: TRANSMISSION 711.651 in MODEL 906 with CODE (N07) Power take-off countershaft (2b) with flange TRANSMISSION 711.660 in MODEL 906 with CODE (N07) Power take-off countershaft (2b) with flange TRANSMISSION 711.680 in MODEL 906 with CODE (N07) Power take-off countershaft (2b) with flange TRANSMISSION 711.685 in MODEL 906 with CODE (N07) Power take-off countershaft (2b) with flange

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 26 Mekaaninen vaihteisto › 26.45 Voiman ulosotto, ulosottovaihteisto — Mallisarja 906

EinPAS 17 Voimansiirtolinja/akseli › 17.45 Ulosotto › 17.45.35 Kotelo/kansi/kiinnitys — Mallisarja 906

Koskee myös moottoreita/vaihteistoja: 711 651, 711 660, 711 680, 711 685

AR26.45-D-0015-03A

Install power take-off bearing cap

 PTO

Number	Designation		Transmissions 711.651/660 with code N05, N07	Transmissions 711.680/685 with code N05, N07


BA26.45-N-1002-01A	Bearing cap or hydraulic pump on power takeoff	Nm	46	46

Drift

711 589 11 15 00

D26.45-1021-01

1 Insert shim (6) with determined thickness in the bearing cap (4).

2 Press in new bearing race all the way using drift (7) .

3 Fit bearing cap (4) with new seal (5).

4 Attach washers (3) and tighten nuts (2) and bolt (1), .

D26.45-1010-03