ar2640d0335r

Remove/install drive shaft radial shaft sealing ring

Tyyppi ar · aihe 26.40 · versio 0100 · 2013-09-02

Koskee: TRANSMISSION 711.683 in MODEL 909

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 26 Mekaaninen vaihteisto › 26.40 Kotelo — Mallisarja 909

EinPAS 17 Voimansiirtolinja/akseli › 17.20 Vaihteisto › 17.20.30 Kotelo/kansi/öljypohja/kiinnitys — Mallisarja 909

Koskee myös moottoreita/vaihteistoja: 711 683

AR26.40-D-0335R

Remove/install drive shaft radial shaft sealing ring

10.07.2013

TRANSMISSION

711.683 in MODEL 909

Remove/install drive shaft radial shaft sealing ring

Shown on transmission 711.685

1	Radial shaft seal

D26.40-1156-01

 	Remove/install
1	Remove the transmission		AR26.10-D-0020R
2	Attach transmission to assembly stand		AR26.10-D-0036R
3	Remove the central clutch release bearing		AR25.20-D-0180R
4	Pry radial shaft sealing ring (1) out of its seat
	Gear oils (Sheet 235.10)		BB00.40-P-0235-10A
		 Do not attach lever between radial shaft sealing ring (1) and seat. If the seat is damaged, the front section of the transmission housing must be replaced.
		 Installation: Replace radial shaft sealing ring (1). Clean seat of radial shaft sealing ring (1) and coat sealing lip with transmission oil before installing
		 Drift	*711589161500
5	Install in the reverse order

Remove/install drive shaft radial shaft sealing ring

711 589 16 15 00

Drift

Viitatut asiakirjat