Remove/install coolant level switch

Tyyppi ar · aihe 20.30 · versio 0202 · 2010-11-25

Koskee: ENGINE 900.9, 902.9, 904.9, 906.9, 924.9 in MODEL 970, 972 ENGINE 900.9, 902.9, 904.9, 906.9, 924.9 in MODEL 975, 976 ENGINE 900.9, 902.9, 904.9 in MODEL 375.1 ENGINE 902.9, 906.9, 924.9 in MODEL 974 ENGINE 904.9, 906.9 in MODEL 374 ENGINE 904.9, 906.9, 924.9 in MODEL 958 ENGINE 925.9 in MODEL 970, 972, 974 ENGINE 926.9 in MODEL 958.0

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

AR20.30-W-4392A

23.11.10

ENGINE 900.9, 902.9, 904.9, 906.9, 924.9 in MODEL 970, 972

ENGINE 900.9, 902.9, 904.9, 906.9, 924.9 in MODEL 975, 976

ENGINE 900.9, 902.9, 904.9 in MODEL 375.1

ENGINE 902.9, 906.9, 924.9 in MODEL 974

ENGINE 904.9, 906.9 in MODEL 374

ENGINE 904.9, 906.9, 924.9 in MODEL 958

ENGINE 925.9 in MODEL 970, 972, 974

ENGINE 926.9 in MODEL 958.0

W20.30-1015-06

Shown on model 970 with body 972.890

1 Expansion reservoir

2 Wiring harness connector

B6 Coolant level switch

Modification notes

25.4.06

Work procedure completely revised

Work steps 1 to 6

 	Remove/install
1	Switch off ignition
2	Open maintenance flap
3	Disconnect connector plug wiring harness (2) at coolant level switch (B6)
4	Turn coolant level switch (B6) through 90°clockwise and pull out of expansion reservoir (1)
5	Install in the reverse order
6	Read out fault memory in drive control FR (FMR) control unit using STAR DIAGNOSIS; delete faults if necessary