Removing and installing the generator support · ar1540s6232a · Mercedes-Benz WIS

AR15.40-S-6232A

Removing and installing the generator support

9.2.95

ENGINE 111 in MODEL 638.0 /1 /2

S15.40-3002-09

1 Bolt M840

2 Bolt M855

3 Bolt M885

4 Coolant pipe

5 Generator support

6 Poly V-belt

G1 Generator

 	Removing, installing
1	Remove generator (G1)		AR15.40-S-5032A
2.1	Detach bottom engine compartment panel	 Only on model 638.2	AR61.20-S-1105A
3	Remove intermediate shaft		AR33.30-S-7706M
4	Unscrew bolts (1, 2 and 3)	 Installation: Fit on bolts (1) and (2). Tighten bolts (3) fully and then tighten bolts (1) and (2) fully.
			*BA15.40-N-1005-01A
5	Remove generator support (5)	 Installation: Pay attention to bracket of coolant pipe (4)!
6	Install in the reverse order

 Generator

Number	Designation		Engine 111.948/ 950/978/980


BA15.40-N-1005-01A	Bolt of generator support to crankcase	Nm	46