ar1530p7100ea

Removing and installing starter

Tyyppi ar · aihe 15.30 · versio 0204 · 2012-02-16

Koskee: ENGINE 111.920 /921 in MODEL 202.018 /078 ENGINE 111.941 /945 in MODEL 202.020 /080 ENGINE 111.961 in MODEL 202.022 ENGINE 111.974 in MODEL 202.023 /083 ENGINE 111.975 in MODEL 202.024 /085 ENGINE 111.944 in MODEL 202.025 /082 ENGINE 104.941 in MODEL 202.028 ENGINE 111.945 in MODEL 208.335 /435 ENGINE 111.944 in MODEL 208.345 /445 ENGINE 111.975 in MODEL 208.347 /447

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 1 Moottori › 15 Moottorin sähkölaitteet › 15.30 Käynnistinmoottori — Mallisarja 202 (mallit 018, 020, 022, 023, 024, 025, 028, 078, 080, 082, 083, 085) · Mallisarja 208 (mallit 335, 345, 347, 435, 445, 447)

EinPAS 15 Moottori › 15.35 Käynnistinmoottori › 15.35.20 Käynnistinmoottori — Mallisarja 202 (mallit 018, 020, 022, 023, 024, 025, 028, 078, 080, 082, 083, 085) · Mallisarja 208 (mallit 335, 345, 347, 435, 445, 447)

Koskee myös moottoreita/vaihteistoja: 104 941, 111 920, 111 921, 111 941, 111 944, 111 945, 111 961, 111 974, 111 975

AR15.30-P-7100EA

Removing and installing starter

15.2.12

ENGINE 111.920 /921 in MODEL 202.018 /078

ENGINE 111.941 /945 in MODEL 202.020 /080

ENGINE 111.961 in MODEL 202.022

ENGINE 111.974 in MODEL 202.023 /083

ENGINE 111.975 in MODEL 202.024 /085

ENGINE 111.944 in MODEL 202.025 /082

ENGINE 104.941 in MODEL 202.028

ENGINE 111.945 in MODEL 208.335 /435

ENGINE 111.944 in MODEL 208.345 /445

ENGINE 111.975 in MODEL 208.347 /447

Removing and installing starter

P15.30-0002-06

1 Electric cable circuit 30

2 Electric cable circuit 50

3 Screws

4 Bracket (model 202)

5 Bracket (only engine 104 in model 202)

6 Bracket

7 Clip/bracket (model 202)

M1 Starter

Modification notes

6.7.00

Figure modified from 42 Nm to 58 Nm

Figure in BA15.30-P-1003-01A for engine 119 modified

*BA15.30-P-1003-01A

Removing, installing

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground cable of battery

AR54.10-P-0003A

Notes on battery

All models

AH54.10-P-0001-01A

2

Remove bottom engine compartment panel

Engine 104, 111 fitted with AC

(code 580) in model 202.

AR61.20-P-1105A

Model 202, 208

AR61.20-P-1105AB

3

Disconnect electric cables (1, 2)

*BA15.30-P-1001-01A

*BA15.30-P-1002-01A

4

Remove bracket (6)

5.1

Remove brackets (4, 5 and 7)

Model 202

6.1

Unbolt rear engine mount at frame

Engine 104 with automatic transmission in model 202

7

Unscrew screws (3)

*BA15.30-P-1003-01A

8

Take starter (M1) down and out

Engine 104 in model 202: turn steering slightly to the left.

9

Install in the reverse order

10

Carry out operational check

11

Make electrical system operational

Perform basic programming.

AR00.19-P-0200C

Starter

Number

Designation

Engine 103, 104, 111, 120

BA15.30-P-1001-01A

Nut of connection of circuit 30

Nm

14

BA15.30-P-1002-01A

Nut of connection of circuit 50

Nm

6

BA15.30-P-1003-01A

Bolt, starter to crankcase

Nm

42

Viitatut asiakirjat